Did you check the injector on cylinder 5? Open circuit could be a wiring issue leading to that injector, or perhaps a problem inside the injector itself.

You can always try swapping injectors around to see if the misfire code follows the injector that is currently used for cylinder 5. The fix may be to replace the injector or fix the wiring.

Checked the coils and put new plugs. Found some liquid in the bottom of the 5 coil car still runs ruff and no power so its been sitting Im going to fixit myself because everyone wants to charge me an arm and leg
If you have any suggestions please help. I can navigate and comprehend direction or dictation very well. Thanks in advance!!!

That’s a good way to go.

I just got both manuals for my 94 ford because they’re both awesome, useful manuals to have, but the haynes tends to have info that the chiltons manuals don’t, and vice versa, so I got both just to be on the safe side.

There could be many causes of this. The best thing to do would be to take truck into a shop to have the issue diagnosed. It could be something simple like a wheel out of balance or it could be loose suspension parts, which would be very bad.

Thanks for the feedback!

What have you tried so far? There could be many causes of a no start condition. Is the check engine light on? Have you scanned for codes?

Check the fuel pump