Last Updated on September 22, 2022
The timing chain is a critical component of the internal combustion engine. Its function is to keep the camshaft and crankshaft rotating together at the same speed. This enables the valves of the engine to open and close at precisely the right times.
These are the valves responsible for allowing air and fuel to flow into the internal combustion chamber. As you probably know, the engine needs the proper amount of air and fuel mixture for the ignition to be successful. That way, the proper amount of power can be generated to satisfy the demands of the vehicle.
If the timing chain were to break, it will jeopardize the entire internal combustion process. This means you won’t be able to drive your vehicle anymore.
Related: Timing Chain vs Timing Belt Differences
What to Expect
If you want to know what exactly will happen when the timing chain breaks while driving, it depends on whether you have an interference engine or a non-interference engine. Although they are both internal combustion engines, the “interference” word refers to the timing configuration of the engine.
No matter which type of engine you have, a broken timing chain will cause your engine to immediately stop running and turn off. If you’re driving, you’ll have to pull over quickly to the side of the road before you lose all your momentum.
When you have an interference engine, the stroke of the piston and valve consume the same area of the cylinder. The timing chain is what prevents them from coming together. However, if the timing chain breaks, the piston and valve will collide. The result will be a damaged cylinder head, valve, piston, cylinder, and/or camshaft.
These are very expensive items to repair or replace. You’d probably be better off either purchasing a new engine or trading in your car for a new one.
See Also: Symptoms of a Faulty Timing Belt
If you have a non-interference engine, the result of a broken timing chain will not be as severe. It will simply cause your engine to turn off but that’s all. The valves, pistons, and other vital components of the engine will not be damaged.
But still, you don’t want to take the chance of being stranded somewhere because of this. That is why it is better to regularly maintain your timing chain and make sure it is doing okay.
If it looks or sounds like it is getting too worn out, then simply bite the bullet and replace the timing chain with a new one. It is a lot cheaper to do that than having to deal with severe engine damage.
This information has been very helpful. The details are so understanable, I feel like I could repair my own vehicle.Well at least I can explain to the repair shop what’s happening to my car. Keep up the good work!!
2005 altima while driving just died,wont jump,nothing electric works,new battery and stuck in park
I’d check the connections around the battery and alternator. Make sure everything is nice and snug and that there’s no corrosion.
Hi. This recently happened to me on my 18 Audi RS3. I was at a red light and when it turned green I stepped on the gas pedal and the car turned off on me. Because I was in the middle of the road I placed it on neutral and a few people helped me push it to the side of the road, then had it towed to a shop and I was just informed the timing chain broke. Waiting to hear on if anything else was damaged, and praying it was just that since I was not driving on one road. I believe the RS3 engine is am interference engine? Do you think there’s a chance the damage could be minor, given I had just pressed the gas pedal when it happened and my car went on EPC mode? Thank you!
How many miles are on the vehicle? That is a strange issue that may be covered under warranty.
I just had a timing chain replaced how fast can I go on the freeway and how many mile do I have to have on it
There’s no break in process for a new timing chain that I’m aware of. You can just drive like you normally would.
My timing belt broke whilst was turning on my engine. What do you think i should do.
If your engine is a non interference engine, all you likely have to do is replace the timing belt.
If your engine is an interference engine, there is a chance that you had valve on valve contact, or valve to piston contact. This could cause some pretty expensive damage, unless you got really lucky and the timing belt broke in a position where there was no contact. In this case, you can try replacing the timing belt and see what happens. If your engine doesn’t fire after the timing belt replacement, a leak down test may help you determine what went wrong, as it will show you where air is rushing through when the combustion chamber should be sealed (on the compression stroke).
My timing chain went on my 2014 beetle while the mechanics were working on it they found that my camshaft had too much give and should also be replaced. Total estimate is $3400 give or take. Car was purchased CPO and I still have 14 payments left. Should I repair car or roll the remaining balance into something new with a warranty? Concerned that I put this $ into repairing the top half of the motor and then end up getting hit with a $2000 bill to repair the bottom half six months down the road. Is this a rational concern or should I feel ok that the top is the issue and I’m good to go from here?
That is completely up to you. Without having seen the car, knowing much about your situation, or knowing the mechanic’s assessment, it’s very difficult for me to give advice on this situation.
Sometimes it’s better to stick with the problems you know, rather than rolling the dice on a different used vehicle.
On the other hand, your mechanic needs to be really honest with you about the current state of the vehicle. If he or she foresees many problems in the near future, it may be best to cut your losses and find a different vehicle in better condition.
Had the top timing chain on bmw 118 go when at a red light …. but it’s the dreaded N47 engine any idea if replaced the car would run again?
That one is an interference engine, right? If so, there is a very strong possibility that other components were damaged when the timing chain let go.
The car could probably run again, but it depends on how much effort (and money) you want to put into it, and the extent of the damage.
It looks like the timing chain on my 2013 Kia Sorento broke. The car just stopped and wouldn’t start. Slight smell like something burned. Battery & oil all good. Took to a local mechanic and he inspected it (not a deep dive) but said it looks like the timing chain. Said he saw what looks like small metal pieces in the oil. I believe the 2013 Kia Sorento SX V6 is a interference engine. I’m wondering if it’s worth taking it to another mechanic to do a deep dive to confirm it’s the timing chain?
It’s up to you if you want to take it to another mechanic for a second opinion. If your timing chain broke and it’s an interference engine, you’re looking at an expensive repair. Cars are misdiagnosed all the time by not looking closely enough at the problem. A deeper dive will cost more but it’s worth it to know exactly what the problem is.
My 2013 Volkswagen Polo broke down when I tried to start the engine after being parked for an hour. I changed the camshaft sensor and the spark plugs but still won’t start. Got a mechanic to come and have a look at it he said the timing chain broke which caused a valve to break as well. Now one of my friends is saying that usually when this happens the steering wheel shouldn’t be moving either(which in my case it still is) so that might not be the cause to why my car broke down. Do you think this might not be the cause? Battery and oil all good.
Steering wheel movement should have nothing to do with the timing chain. I would trust the mechanic.
If my timing chain went out in my 2009 chevy Traverse while I was driving, what all damage to my engine should I expect?
Assuming this is an interference engine (I think it is), you can expect bent valves which will require head work at a minimum. There is a small chance the timing chain could fail and you get very lucky, where the pistons and valves don’t contact each other. It can happen, but it’s rare.
I have a 1999 Infinity G20. The timing chain broke and the mechanic says it needs a new engine. Does this car have an interference engine?
I think it’s an interference engine.
So is a F-150 Ecoboost engine a interference or noninterference engine? Will any oil blowout of the side of the engine when the timing chain breaks?
I think it’s an interference engine, so you’ll have more concerns than just oil if the timing chain breaks.
Hi Sean,
I was just told the chain timing belt on my 2010 Nissan Murano with 149,000 miles that the chain is stretched and perhaps all the chains need replacing the car you would never know a problem with it except my engine light came on they’re asking for about 2000 $3000 to have the engine taken out and the chain belt replaced as well as the others;
In your opinion what do you think I should do should I trade it in it just ran fine all the way back to my place from the auto mechanic 30 mile
Drive: No rattling no nothing you would never know it however I’m concerned it could break down at any time and just thought I’d ask your opinion: I have always replace the oil religiously and taking care of my Marano: thx Anne
What code was stored, and why did they think the chain was stretched? Did they do any tear down of the engine during the diagnosis? If it drives fine for now it’s ultimately your call what you want to do with it. I’d be surprised if you’re having timing chain issues without any symptoms, though.
I have a 2003 Toyota Highlander 2.4L I4, I just went through the process of premature head gasket failure. New water pump, timing chain, heads remilled, helicoils, the whole nine yards. My engine light is still on, idling slightly rough and throwing code p0301 for cylinder 1 misfire. All spark plugs replaced, new fuel injector, ignition coil was in good shape. I’m worried that the timing chain either was not reset properly or the tensioner is going bad. Checked my dipstick today and did not notice any metal shavings nor was I notified of any. Shop tested everything from leak down, smoke test, compression test, etc, everything came back clear. Car still runs well, just the slight idle vibration and CEL. Maybe a couple blown fuses? I’m not sure. Thanks
This is a very good question, thank you for providing all of that detail. I assume there is no chance that the p0301 code is old? Do you have any pictures from when the engine was disassembled? I am wondering if cylinder 1 looks different than the others in any way.
Have you tried swapping spark plugs, injectors, and ignition coils around to see if the code follows any particular part? If a different cylinder starts misfiring after you switch your spark plugs or injectors, that would narrow the problem down very quickly.
My 2010 hyandi Sonta gurcled and died on the road , has 173,000 miles but was running great , had to get it towed to the house . How can i tell if its the timming chain ,and how much will it cost to fix it ?
If you are able to restart the car at all, it is not a broken timing chain.
Before you try to start the car, make sure the engine turns over easily by hand. Impossible to say how much it will cost to fix the car without knowing what the problem is.