6 Symptoms of a Bad Tie Rod End (and Replacement Cost)

Last Updated on August 15, 2022

Tie rods are vital for precise steering in all vehicles. A functional tie rod connects the suspension and steering system to the front wheels on the ground by several joints, so that the wheels turn accurately as the steering wheel is turned. Such a system allows the driver to use minimal force to turn the vehicle.

But like everything in a vehicle, the tie rod ends will age over time. They will also endure faster wear and damage if you regularly drive over bumps or rough roads.

Need help with a car problem RIGHT NOW?
Click Here to chat online with a verified mechanic who will answer your questions.

Such conditions may cause the tie rod ends to malfunction within a few years, but those on other vehicles may last many years without replacement. Bad tie rod end symptoms can present themselves in various ways.

What is a Tie Rod End? 

what is a tie rod end

Tie rods, made up of inner tie rods and outer tie rods, link the front wheels to the steering wheel. Both have greased ball joints at the ends to allow rotational forces to be transmitted through the system.

The outer tie rod end is protected by a rubber boot to keep grease in and dirt out, but this rubber can crack with time and allow moisture to get inside the joint and cause corrosion.

See Also: 4 Symptoms of a Bad Ball Joint

Bad Tie Rod End Symptoms

You’re probably wondering how do you know if a tie rod end is bad? Well, there are several very noticeable symptoms that you can watch out for. Below are some common symptoms of a faulty tie rod end.

#1 – Steering Wheel Vibrates or Shakes

steering wheel shakes

The tie rod keeps the components of the suspension solid and tight. If the tie rod end goes bad and loosens, the parts of the suspension will also loosen and cause vibrations and shakes which can be felt in the steering wheel while the vehicle is in motion.

These steering wheel vibrations worsen as the car accelerates and when turning corners.

#2 – Poor Front End Alignment

bad front alignment

The tie rod helps sustain the alignment of your vehicle’s front end, and a damaged or worn tie rod end causes loosening of the parts. This will cause the front end to become misaligned and track poorly. 

This misalignment is noticed while driving the vehicle because it will start veering to the left or right as it’s pointed forward. This is easy to see if you briefly remove your hands from the steering wheel after directing it straight while driving. A properly-aligned vehicle should maintain a straight path. 

#3 – Steering Wheel Feels Loose 

steering wheel hard to turn at low speeds

A bad tie rod end can also cause the steering wheel to feel loose or have excessive play. This is a dangerous condition, as it can lead to a complete lack of steering. Take the car to the auto shop at once if you notice a loose steering wheel.

See Also:  Causes of a Steering Wheel That’s Hard to Turn

#4 – Abnormal Sounds

car jerks when accelerating

Any squeaking or squealing while the vehicle is in motion can indicate undesirable metal-on-metal contact. A high-pitched squeaking sound while driving the vehicle, especially around corners, can indicate a tie rod end rubber boot that has cracked, allowing for a loss of lubrication.

Clunking or rattling can also be heard from the front end of the car. Since strange noises don’t automatically imply a failing tie rod end, you’ll want to see if any other symptoms on this page exist.

#5 – Abnormal Tire Wear 

uneven tire wear

Tire wear is a normal occurrence, and should be even on both sides. Uneven wear on one or more tires can indicate a problem. A bad tie rod will cause the inner or outer edges of a tire to wear faster than the rest of the tire. 

You can check for abnormal tire wear by standing in front of the vehicle and looking at the inside and outside edges of the front tires.

Uneven tire wear can also have other causes such as a bad alignment, improper tire pressure, or unbalanced tires so it is a good idea to have the car examined by a mechanic. 

#6 – Vehicle Vibrates

car shakes when accelerating

Once the tires begin to wear unevenly, the entire vehicle can start to vibrate.These vibrations intensify with acceleration, which makes it difficult to drive comfortably. Comfort may be the least of your worries, though.

Vehicle vibration can also be caused by nearly complete failure of the tie rods, which is a very dangerous situation. In this case the tires are loose and shaking on their own, and you may be close to losing steering. Have the vehicle repaired immediately. 

See Also: 3 Symptoms of a Bad Sway Bar or Sway Bar Link

Tie Rod End Replacement Cost

Best places to order parts?  See: 19 Best Online Auto Parts Stores

tie rod end replacement cost

On average, the cost to replace a tie rod end ranges from $100 to $400 depending on vehicle, quality of parts used, and how hard it is to get to the tie rod end.

For parts cost, a tie rod end can cost anywhere from $20 to $100, no matter if its the inner or outer tie rod. Outer tie rod ends are fairly simple to replace so expect to pay around $80 to $100 in labor as most mechanics will charge a one hour minimum. Inner tie rod ends take a bit more effort to get to so count on about $150 to $300 in labor.

Since at least 50% off the total cost is labor, it makes sense to buy OEM or high quality parts to get your money’s worth. Don’t forget to include a front-end alignment in the cost estimate as this is necessary after the repair is completed.

Shop around to compare labor rates at all your local auto shops to reduce the total cost as much as possible. Obviously, lowest labor rate is everything but often you can find a trustworthy independent shop that charges half of what a dealership would charge. Taxes and other fees may be added to the final price as well. 

Checking the Tie Rod Ends Yourself

It’s a good idea to have the vehicle checked by a mechanic if you notice any of the above symptoms. 

However, you can first check to see if your tie rods are loose by grasping a front wheel on the sides and simultaneously pushing with one hand and pulling with the other to see if there is any play in the wheel.

The tie rod can also be grasped and wiggled to check for laxity. Excess mobility is abnormal and repairs will be needed immediately.

24 thoughts on “6 Symptoms of a Bad Tie Rod End (and Replacement Cost)”

  1. Thank you so much. My 2003 Buick, Park Avenue does not have any of those symptoms. Runs smoothly but all the lights on the panel are on, ABS, service your engine soon etc. Took it to a mechanic, it has torn boots and worn outer tie rod end R&R tie rod end outer. total $199.78.

    Reply
  2. I have gotten my toe rods check out and the mech said they are fine. Instead we replaced the shock mount and shock absorbers. After those replacements the clunking and clanking Noise still persisted while driving. More so while driving on bumpy roads like a parking lot and cobble stone roads. What else could be the issue?
    *also when I jacked up the front end I steered left and right rapidly and there were no noise

    Reply
  3. Jack the vehicle up and grab the wheel at 3 and 9.try and move the wheel in and out/side to side.Then do the same but hold the wheel at 12 and 6.If the movement is only at 3 and 9 then most likely its the track rod.If theres excessive movement in both 12 and 6,3 and 9 then it could be a loose drive shaft or badly worn bearing.

    Reply
  4. I have replaced steering rack, tie rod and control arm on my mazda..it keep on clinking and wandering is still there. What is the problem?

    Reply
  5. Right after I purchased new tires for myNissan murano 2013, a loud buzzing noise started coming from my front passenger tire area. We initially thought it was a bad bearing. However A friend of mine looked at it & saidthat that the tie rod end was loose?? He tightened it for me & it drives 75% better except only when I turn slightly left I can hear the buzzing sound again. Any ideas on what may be causing this?

    Reply
    • I’m not sure. It would be best to take the car to a mechanic and get it checked out to make sure it has been repaired correctly. Bad tie rods aren’t something you want to mess around with.

      Reply
  6. I’ve a 2011 Peugeot 3008. On the left side at the front when driving it is squeaking constantly, there is a clunking sound when I turn my steering to the left and like a pressure creaking when I apply breaks. I have had it to 3 mechanics over the past few months and none have fixed the problem. 1st mechanic said he replaced track rod ends. 2nd mechanic said it was my clutchbamd the 3rd said he could find no issue with it. I’m at a complete loss as to what to do. From putting these issues into Google I’ve come up with possibly toe rod ends and or top mount strut. Any ideas?

    Reply
  7. I drive a ford figo and there’s a vibration when i reach 120kmh on the passenger side i did wheel balancing and alignment. what do you think could be the couse of this vibration.

    Reply
  8. While driving straight I feel the car move to one side and have to keep the staring wheel turned to the other side to keep it moving straight. Staring wheel is unusually too loose or soft. What might be the problem.

    Reply
    • Sounds like a suspension or alignment issue, though it could be a bad tie rod end. You’ll have to have the vehicle inspected to narrow the problem down. Best to get this done as soon as possible.

      Reply
  9. Well your problem with the tie rod that was loose is you can’t just “tighten” it up and voila its all better. When you are repairing them and having them replaced we often will mark or count how many turns so that the factory numbers are still within the oem steering specifications. So I would assume he probably over tightened it on one side because he would have had to take the opposing side off and count how many turns he did to get the proper number on the side he tightened. That’s why your saying it’s only 75% better cus its off just enough to still make that occasional wander or pull slightly. Hope that helps you out and that you try this solution to the tie rods to make sure there both within spec and even on both side.

    Reply

Leave a Comment